Papillon Silhouette with "JUST ONE DOG SHY OF BEING A CRAZY DOG LADY" Decal
Item Number: 416
Time Left: CLOSED
Description
Adorable Decal by NickerStickers with "JUST ONE DOG SHY OF BEING A CRAZY DOG LADY" going around a Papillon silhouette. This 5" tall x 5" wide die-cut decal is made of high quality vinyl rated for six years. A die-cut decal is the image cut out of a piece of vinyl with no background. Die-cut decals look like they are painted on. Very cool! It is an all-weather adhesive decal that will stay put through all weather, sun and washing. It is designed to be used on the outside of your window or other surface. The decal can be removed, but will not be reusable after removal.
Easy to apply to:
- Windows
- iPads
- Laptops
- Binders
- Lacquered hardwood
- Smooth Walls
- Metal
- Aluminum
Detailed instructions for applying the die cast decal are listed below & on the back of the decal.
Special Instructions
Shipping cost will be added to winning bid.
Instructions for placing die cast decal:
1.) Clean the area where the decal will be placed. DO NOT USE WINDOW CLEANER! First wash with 50/50 dish soap and water. Rinse and dry with lint free cloth. Then wash again with 50/50 rubbing alcohol and water. Dry with lint fee cloth. Do not use citrus cleaner or any other commercial cleaners as the are designed to remove adhesives and will interfere with the decal's adhesive and your decal will fall off.
2.) The decal will be visible thru the transfer paper. SLOWLY separate and peel the protective backing paper from the transfer paper which carries the graphic. Keep an x-acto knife handy, as your decal may want to stay stuck to the backing paper. In that case, use your knife it to help lift away the edge of the graphic from backing paper, then rub the transfer tape on that area again before continuing on.
3.) Slowly roll the transfer paper with exposed graphic onto the surface and begin to lightly rub down vinyl EVENLY from CENTER, from top to bottom until you reach the end.
This is your big opportunity to avoid bubbles and creases by going SLOWLY and applying EVENLY!!!
4.) Rub down firmly with fingers.
5.) Now use the credit card to slowly but firmly rub graphic onto the surface, so that transfer paper will separate from graphic.
6.) SLOWLY pull away transfer paper at a sharp angle, (because it will want to resist!) It's okay to leave your transfer tape on for a few hours before taking off.
7.) Tiny bubbles will disappear by themselves. Pop any large bubbles with a pin and rub. Warming the vinyl with a hair dryer will help in rubbing out bubbles and creases. Warm vinyl is pliable.
8.) Use left-over piece of backing paper or a soft cloth to shield your vinyl from direct contact with credit card to rub out a bubble or crease.
BUBBLES!
There may be a couple of reasons that cause bubbling. Here are some solutions.
1.) Be sure you have removed the clear transfer tape on top of your decal. It is a low-tack, temporary tape that is supposed to be removed. It will bubble badly and look awful. Your actual decal is under the transfer tape and will look great when you remove the transfer tape.